This is what Ford should have installed on the track pack option! Brake cooling ducts are very important for open tracking heavy cars like the GT500.
I wanted a clean look that blended in with the front spoiler. If you don't know how to fab things or used a dremel this mod is not for you. After 10 hours of playing in the garage this is what the final results are. One change I would make is to move the spoiler duct to the outside 1/4" or less to allow better access to the lower spoiler bolt.
Brake cooling ducts were found in the UK @ Merlin Motors Sport
Link
Rotor ducts @ Full Tilt Boggie Racing
http://fulltiltboogieracing.com/2013-2014_Shelby_Brake_parts.htm
3" Brake duct hose can be found @ Racer Parts Wholesale
Link
I wanted a clean look that blended in with the front spoiler. If you don't know how to fab things or used a dremel this mod is not for you. After 10 hours of playing in the garage this is what the final results are. One change I would make is to move the spoiler duct to the outside 1/4" or less to allow better access to the lower spoiler bolt.
Brake cooling ducts were found in the UK @ Merlin Motors Sport
Link
Rotor ducts @ Full Tilt Boggie Racing
http://fulltiltboogieracing.com/2013-2014_Shelby_Brake_parts.htm
3" Brake duct hose can be found @ Racer Parts Wholesale
Link
Last edited: