As the title says. I have a 2.93 upper, a 2# lower, a MAF.ia, K&N Filter, and a tune. All installed and runs nice.
I just put my overlay on and calibrated it using a compressor and gauge. Works great. I took it out for a spin and I cant get it to go over 10psi. I was expecting 14 or 15. I have tried different RPMs and load. Only thing I can think of is:
- Is there some sort of bypass the last person forgot to disable?
- Is the fuel stabilizer I used holding the boost back?
- Did I calibrate the gauge wrong (doubtful)
Edit:
Just got a response on another forum:
Ideas? Agree?
I just put my overlay on and calibrated it using a compressor and gauge. Works great. I took it out for a spin and I cant get it to go over 10psi. I was expecting 14 or 15. I have tried different RPMs and load. Only thing I can think of is:
- Is there some sort of bypass the last person forgot to disable?
- Is the fuel stabilizer I used holding the boost back?
- Did I calibrate the gauge wrong (doubtful)
Edit:
Just got a response on another forum:
3500 feet elevation.
Someone at sea level may get that boost spinning the SC that fast with those pullies, but you won't.
Ideas? Agree?
Last edited: