there was a discussion in another thread (210 temp) and someone asked can you look at or adjust the temp settings with a predator tuner...
here's how:beer:
for this writeup when i say I'm using the "ok" button it is actually the circle in the middle of the 4 arrows
1. plug in handheld to OBD port
(i have a custom tune on my predator and am using that for reference)
2. select performance tune
3. select agree (diablo not responsible blah blah blah)
4. prompt says turn ignition on (follow it) but DON'T START engine
5. next screen asks diablo tunes or custom... since I have a custom tune i scrolled
down to SELECT CUSTOM TUNE
6. the name of the tune appears , hit "ok" button
7. select choose
8. scroll down and select modify tune
9. select agree (another diablo not responsible)
10. select modify parameters
11. scroll down to *cooling fan and hit "ok"
you will see
high speed fan ect1 on
high speed fan ect2 on
high speed fan ect off
low speed fan ect off
low speed fan ect on
you can select each one separately and when you do you will see a screen that has a slider and three numbers left is lowest # middle number is where you currently have the parameter set and can use the left and right arrows to move it to where you want and the right number is the highest #
looks like this
180-------------------204-------------------220
............................... /\
this is what your set at (204 as an example) and you can adjust with the left and right arrows
my settings are high spd fan ect1 on 204
high spd fan ect2 on 208
high spd fan ect off 204
low spd fan ect off 190
low spd fan ect on 190
you can go into each one and just LOOK and then press escape to get back and not make any changes... if you just look, and not change anything when you escape out all the way back out to the main menu it will still ask "INSTALL TUNE" select NO since you just looked
if you do make adjustments, same thing when you escape back to main menu it will ask "INSTALL TUNE" you would select yes
looks like a lot but it is really easy,
here's how:beer:
for this writeup when i say I'm using the "ok" button it is actually the circle in the middle of the 4 arrows
1. plug in handheld to OBD port
(i have a custom tune on my predator and am using that for reference)
2. select performance tune
3. select agree (diablo not responsible blah blah blah)
4. prompt says turn ignition on (follow it) but DON'T START engine
5. next screen asks diablo tunes or custom... since I have a custom tune i scrolled
down to SELECT CUSTOM TUNE
6. the name of the tune appears , hit "ok" button
7. select choose
8. scroll down and select modify tune
9. select agree (another diablo not responsible)
10. select modify parameters
11. scroll down to *cooling fan and hit "ok"
you will see
high speed fan ect1 on
high speed fan ect2 on
high speed fan ect off
low speed fan ect off
low speed fan ect on
you can select each one separately and when you do you will see a screen that has a slider and three numbers left is lowest # middle number is where you currently have the parameter set and can use the left and right arrows to move it to where you want and the right number is the highest #
looks like this
180-------------------204-------------------220
............................... /\
this is what your set at (204 as an example) and you can adjust with the left and right arrows
my settings are high spd fan ect1 on 204
high spd fan ect2 on 208
high spd fan ect off 204
low spd fan ect off 190
low spd fan ect on 190
you can go into each one and just LOOK and then press escape to get back and not make any changes... if you just look, and not change anything when you escape out all the way back out to the main menu it will still ask "INSTALL TUNE" select NO since you just looked
if you do make adjustments, same thing when you escape back to main menu it will ask "INSTALL TUNE" you would select yes
looks like a lot but it is really easy,