you guys have problems clearing this code...

Darth Racer

Member
Established Member
Joined
Jan 18, 2001
Messages
387
Location
Wichita, KS.
P068A......I have a SCT tuner and attempted to clear that code. The scanner claimed that the code was cleared, but it wasn't.

Any suggestions?
 

megameGT500

Suck it up and drive on!!
Established Member
Joined
Feb 11, 2008
Messages
1,486
Location
OK
Found this. Hope it helps.


P068A/001674 - ECM Power Relay Load Circuit: De-Energized Performance Too Early
Possible Symptoms

Malfunction Indicator Light (MIL) ON

Possible Causes

Fuse(s) faulty
Ignition Switch faulty
Wiring and/or Connector(s) from/to Power Supply Relay (J271/J317) faulty
Power Supply Relay (J271/J317) faulty

Possible Solutions

Check Fuse(s)
Check Wiring and/or Connector(s) from/to Power Supply Relay (J271/J317)
Check/Replace Power Supply Relay (J271/J317)
 

Darth Racer

Member
Established Member
Joined
Jan 18, 2001
Messages
387
Location
Wichita, KS.
You know....I don't drive the car much. It sits for a while before I drive it. I had a hunch it might be the battery (it barely started). So, I just charged the battery and.....poof....no more problem.

This was a strange one.
 

plattner

New Member
Established Member
Joined
Sep 3, 2010
Messages
40
Location
ohio
i just got this code, and i hope that putting the charger on the battery solves it. if not then i guess i need to pull all the fuses.........shit. it seems im plaqued with problems with this car. fix one issue and another appears, almost to the point of selling it..
 

AlanSVT

New Member
Established Member
Joined
May 7, 2007
Messages
1,972
Location
Sanford NC
Hell yeah I just picked up one for my car after my battery took a crap. Paid like 20-30 bucks at wally world...
 

plattner

New Member
Established Member
Joined
Sep 3, 2010
Messages
40
Location
ohio
i got a 2011 svtppg with a 2.9 whipple , and i do love the car but all these little problems are driving me nuts. 1st was the o2 sensor, then thefuel rails keep leaking , then modular depot put in the wrong o2 sensors 2010 not 2011 then the wire harness for the o2 sensor was cut a little threw engi lite on , then the tune seemed off , then this p068a and a few other issues that im just not going to bring up.
 

plattner

New Member
Established Member
Joined
Sep 3, 2010
Messages
40
Location
ohio
well the overnight charge on the battery tender and cleared the code and started up with no issues so far. yahhhhhh
 

Users who are viewing this thread



Top