X2 guys enter here

[stang.99]

I want to put x2 with MM bumpsteer. Is any special things with this combo ? I will go at shop for aligment and bumpsteer

 

[03' White Snake]

I have the X2's and Steeda bumbsteer. I am running the spacers that come with the balljoints since I have no ISO's in. I went to a well known suspension alignment shop in my area for my alignment.

 

[shurur]

Just that x2 (without the spring spacer) will lower you another ~1/2" on the front. .1/4"-3/8 really.
I have MM bump steer and installed per Steeda instructions.

Make sure you use/keep all the spacer rings on the Bump steer.

 

[stang.99]

If i use Front MM Iso without X2 spacer, is this the same than use Stock ISO with spacer ?

I also read some dust brake mods to clear the X2

 

[shurur]

If i use Front MM Iso without X2 spacer, is this the same than use Stock ISO with spacer ?

I also read some dust brake mods to clear the X2

The front MM iso thickness is a bit more than the OEM iso..so those combos would be close in drop. It's so hard to say.

As far as the dust shields go, I suppose you can cut a bit out with snips.
I just took mine out and didn't even say goodbye to them.

 

[03' White Snake]

I had my dust shields on for 2 yrs with no problems. I just removed them recently when I installed poly A arm bushings.