X-Pipe Help !!!!!!!!

[AeonLawson]

will a x-pipe for a 94-98 GT Fit on a 94-98 Cobra ??

 

[4valved]

The mounting points are diff on some brands but it should bolt up fine

 

[Chris.94GT]

Probably not. Your year range encompasses 2 totally different engine designs.

 

[deadernie]

the mounts to the exhaust manifold are different IIRC.

 

[AeonLawson]

okay thanks

 

[KCRN12]

It'll work just fine. I have the xpipe that was on my gt on my cobra swap.

 

[KCRN12]

Well.... All I can say is that it will bolt up to the manifolds just fine. The mount at the transmission is in a different location but honestly, you don't need it. I had to cut mine off when I swapped the power train and I haven't had any issues. As long as all the connections are tight, you don't need the mount at the trans.

 

[Shake&Bake]

Well.... All I can say is that it will bolt up to the manifolds just fine. The mount at the transmission is in a different location but honestly, you don't need it. I had to cut mine off when I swapped the power train and I haven't had any issues. As long as all the connections are tight, you don't need the mount at the trans.

That's correct. However the o2 sensors for the GT are in a different position and may interfere with the tranny mount. You might not be able to snug it up under the car as tight as you would a x-pipe designed for the Cobra.