WTB- S/C, I/C, T/B Gaskets and bolts...

[BoosT_AddicT]

Hey guys, I'm going to be doing a R/R on my blower soon and I wanted to get a set of gaskets for the blower, T/B and I/C along with I/C bolts since they need to be replaced per the service manual. If anyone has this stuff laying around or knows where to order the set online, please let me know. Thanks!

 

[jerardogav]

I have three of the four bolts for the ic

 

[BoosT_AddicT]

BUMP... Sorry I'd rather just get all of the bolts from someone.

 

[jerardogav]

You could reuse all of the gasket and bolts thats what i did. The only reason I bought new bolts for the ic midplate was cause i broke one so I had to buy all four.

 

[mcarbine]

I also reused everything. I was very careful with the gaskets when I was taking stuff apart. When I pull everything back off to install the KB 2.3 I will by new gaskets and bolts for good measure. Good luck Matt

 

[mustang347strok]

waste of money to buy new .Use the old gaskets and bolts. Just be careful pulling them off.