• Welcome to SVTPerformance!

Wtb hp 2.5 inch hotpipes/downpipes

Discussion in 'Turbo Cobras' started by drohan8592, Nov 23, 2009.

  1. drohan8592

    drohan8592 Member Established Member

    Messages:
    622
    Joined:
    May 28, 2004
    Location:
    Philadelphia
    I desperately need the older stlyle HP 2.5 inch downpipes. The first shop that tried to install my kit butchered the downpipes to try and make it fit, and didn't work out so well.... Took it to a place that knows what they're doing, but we need only downpipes to be complete. If anyone has the old pipes from an upgrade to the new 3 inch PLEASE let me know. Thanks in advance.
     
  2. ret_junior

    ret_junior LS7 HNTR Established Member

    Messages:
    307
    Joined:
    Feb 7, 2009
    Location:
    Covina, California
    Bump for you, sucks that Augy is to slammed right now :bored:
     
  3. andreas.e

    andreas.e User from Sweden Established Member

    Messages:
    902
    Joined:
    Apr 2, 2005
    Location:
    Stockholm/Sweden
    I have old style hot side layin around here in Sweden.

    There are some dents on them, but fittings for EGT + O2 bungs on the header to turbo pipes.

    Doing 3" hotside now, but had some plans on using the old pipes for a messin'-around-stang. But that will prob. not happen. So you can buy them.

    Guess shipping would be around 200 bucks to the US if you only need downpipes + header to turbo pipes. That is just a guess though, need to see the size of the box first.

    $350 for the pipes?
     
  4. drohan8592

    drohan8592 Member Established Member

    Messages:
    622
    Joined:
    May 28, 2004
    Location:
    Philadelphia
    I really just need the downpipes. I'm sure your looking to sell all of it since you cant really use the rest, which i totally understand. How bad are the dents? Not sure about shipping from Sweden, I'll have to do some research. Thanks in advance.
     
  5. CobraMac

    CobraMac Active Member Established Member

    Messages:
    3,048
    Joined:
    Dec 16, 2006
    Location:
    Orange County, CA
    Good luck man....I needed the headers and searched around for a month...than decided to purchase them through HP and they B.S.ed me for 6 weeks until I raised hell. I had to call the freaking coater and pay him directly to get them shipped to me. DO NOT order them through HP man
     
  6. drohan8592

    drohan8592 Member Established Member

    Messages:
    622
    Joined:
    May 28, 2004
    Location:
    Philadelphia
    HP is a joke when it comes to getting anything in a reasonable manner (6 months). I will never go with them for ANYTHING again. I thought there would be a few people around with the pipes that converted to the 3 inch kit.
     
  7. FULLBLOWN03

    FULLBLOWN03 New Member Established Member

    Messages:
    6
    Joined:
    Jun 30, 2005
    Location:
    ALABAMA
  8. drohan8592

    drohan8592 Member Established Member

    Messages:
    622
    Joined:
    May 28, 2004
    Location:
    Philadelphia
    email sent
     
  9. CobraMac

    CobraMac Active Member Established Member

    Messages:
    3,048
    Joined:
    Dec 16, 2006
    Location:
    Orange County, CA
    Do either of you guys have a picture of the flange that connects the downpipe to the turbo??! I can't find mine and need to order new ones from a website but don't know what the look like haha.
     
  10. blowngt

    blowngt Active Member Established Member

    Messages:
    1,151
    Joined:
    Nov 14, 2003
    Location:
    South Florida
    Like this:

    V-Band assemblies, Aluminum V-Band Assembly, RPS-Vband-AL | RacePartSolutions.com

    I've seen these personally and they are by far the best design out there. They have a lip that makes lining the pipes up easy and they seal so you don't have leaks.

    Give Darrin and John a call. They are great guys to deal with.....
     

Share This Page