WTB Half Shafts for 99 Cobra

[Cannons]

I belive mine are shot, I was able to turn the driveshaft about 30-40 degrees back and forth. I pulled out the diff and the backlash is at .010. I am able to grab the axle shaft in one hand and turn the splines about 20 degrees and it seems like alot of play. The car sounded like a tire was rubbing when taking slow turns with the clutch engaged, it I pushed the clutch in around a turn there is no noise. I have eaton posi and 4.10 gears with stock spline count.

 

[type911]

I may be able to help. swapping My dif and axles for an 03 dif and axles. My 99 axles will just sit in my basement. PM Me

 

[Cannons]

I removed them and I have some play on the inner side of the shafts. The outers seem somewhat tighter. When I turn the inner side of the shafts I have about 1/4 inch of play in them.

 

[Cannons]

Still looking.....

 

[99Blkcobravert]

I have a set from my 99 Cobra setup. PM me.

 

[Cannons]

Special Thanks to JJ Cobra for the half shafts......