WTB Billetflow 92mm Idler Pulley ASAP

[SlowLNF]

I need a Billetflow 92mm Idler ASAP. I don't care what color it is. If I can't get one by Monday used I'll be buying one new.

Mine went out after only 1k miles :fm:

Fastest way to get a hold of me is by texting or calling me at 810-728-4537

 

[Parts-is-Parts]

Just go to NAPA and buy bearings for it.
The part # of the bearing is stamped right onto the bearing shell.

 

[SlowLNF]

Just go to NAPA and buy bearings for it.
The part # of the bearing is stamped right onto the bearing shell.

no NAPA's around, would Autozone carry them?

 

[black 10th vert]

no NAPA's around, would Autozone carry them?

They should be able to cross-reference the part number. Just make sure you use an appropriately sized socket, or other piece of tubing to press the new one in by it's outer shell/race. You don't want to press on the dust seal, or the inner race when installing it, or it will damage the new bearing. BTW, a replacement should cost $10, or less.;-)

 

[SlowLNF]

They should be able to cross-reference the part number. Just make sure you use an appropriately sized socket, or other piece of tubing to press the new one in by it's outer shell/race. You don't want to press on the dust seal, or the inner race when installing it, or it will damage the new bearing. BTW, a replacement should cost $10, or less.;-)

Thanks. I'll check them after work today.

 

[black 10th vert]

Your thread reminded me of the need to do my own, so I actually did 3 of them today. Not sure which was making noise, but did them all just to be sure.