WTB: 03/04 Redfire coupe

[99riocobra]

Alright guys, I'm in the market for a redfire 03/04 coupe. I've found a couple of close options (different color or in a vert) but I'm determined to exhaust all efforts before I move on to a different color or give in to a vert. I'm pretty open to miles, mods, price if it's the right combo. I'm located in the STL area, but am willing to travel to pick it up.

Anyway, here's a check list on what I'm looking for:

- Redfire in color
- Coupe
- Must be very well taken care of and cleaned regularly..meaning exterior, interior, and engine bay
- Miles can vary, but I'd like to go no more than 70k
- Mods are ok if done well (I'm picky and won't even bother if it looks half assed)
- If modded, details on where tuned, dyno graphs/numbers, any other details are all must haves
- Never smoked in (don't even bother if it has a hint of smoke smell)
- Must still have 6 speed and IRS
- Willing to pay for the right one, so I'm pretty open to price depending on miles, mods, condition, etc

Ready to buy now, so let me know what you got!

Thanks

 

[Ourobos]

We are not too far apart, I drove to St. Louis to pick my Marauder up a few months back. Mine is at the details shop getting extra spiffy, I pick it up at the end of the week and will take current photos.

http://www.svtperformance.com/forum...dfire-Cobra-in-KY-56k-Built-bottom-end-21-000

 

[Magee630]

Fs 03 redfire coupe in ky 16k miles
http://s1050.photobucket.com/user/magee630/library/

Hopefully the link worked.
Its an 03 Redfire Cobra coupe with just over 16k miles. mods are as follows: with less than 1k miles

Polished 2.8H KB w/3.1 pulley
Accufab throttle body
80lb Ford Injectors
Steeda CAI
Division X fuel rails
Killer Chiller 2nd gen
BBK Longtube headers, BBK O/R xpipe into Mac exhaust
Spec 3 900HP rated clutch
26spline input shaft
Mcleod TOB
custom driveshaft with chromoly yokes
recently installed MGW orange handle shifter with custom Redfire SVT shift knob
Maximum motorsports subframe connectors only been on the car a month.
Eibach pro kit lowering springs
stock 3.55 gears
Billet Flow Diff brace
IRS with FTBR bushing kit installed this past February
Glenns Performance sump tank
Holley performance external fuel pump
(Fuel system was pieced together and installed by Adam Maurer at S&M Motorsports in Cleves OH, as well as all performance installations)
Also tuned by Adam and made 621/610 on his Mustang Dyno
car runs on E85 and is an absolute beast!!
Installed 18" XXR 531 Platinum rims in June, 9.5 in front and 11" in rear with 335/30/18 Hoosier DR(rear wheel well lip is NOT shaved/rolled)
Paint is 9.5 outta 10 with a couple typical rock chips in the front you have to look for to even see.
Thats all i can remember for now, anything i missed please let me know.
Clean and clear title so no loan to be payed off.
ASKING $29K OBO!!!


Email me with further questions or pics at
[email protected]

 

[99riocobra]

We are not too far apart, I drove to St. Louis to pick my Marauder up a few months back. Mine is at the details shop getting extra spiffy, I pick it up at the end of the week and will take current photos.

http://www.svtperformance.com/forum...dfire-Cobra-in-KY-56k-Built-bottom-end-21-000

Thanks for the response. Looks like a lot of car for the money.

Fs 03 redfire coupe in ky 16k miles
http://s1050.photobucket.com/user/magee630/library/

Hopefully the link worked.
Its an 03 Redfire Cobra coupe with just over 16k miles. mods are as follows: with less than 1k miles

...

Email me with further questions or pics at
[email protected]

Thanks for posting. I've seen this one on here, pondered with it back and forth. Will let you know if I want to pursue.

 

[99riocobra]

Had a couple of prospects through pm.

Anyone else??