Home
What's new
Latest activity
Authors
Store
Latest reviews
Search products
Forums
New posts
Search forums
What's new
New posts
New listings
New products
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
Cart
Cart
Loading…
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Search titles only
By:
Menu
Log in
Register
Navigation
Install the app
Install
More options
Change style
Contact us
Close Menu
Forums
Cobra Forums
The Terminator
Turbo Cobras
wot box install help
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="nanastymach1" data-source="post: 12314822" data-attributes="member: 70023"><p>Today I worked on installing this on my turbo 03 cobra and let's start off that I have a chip installed and tuned by fast lane motorsports which already has a 2 step installed so i don't think the wotbox 2 step works</p><p></p><p>But I really want the no lift shift part to work... the 1st 2 steps to test looks good and works fine but the #3 test doesn't work and we think we installed the red and black wires just the way the instructions said need help...ill take pics tomorrow </p><p></p><p>Troubleshooting ‐ Testing the WOT Box</p><p>1. Key on the car but do not start the engine. Press the gas pedal to the floor. You should see</p><p>the LED on the WOT Box start to rapidly blink. If it does not, check your APP sensor signal</p><p>connection (WOT Box BLUE wire).</p><p>2. Next, with the gas pedal still depressed, press the clutch pedal to the floor. You should see</p><p>the LED on the WOT Box briefly go out, and then come back on solid for one second and</p><p>then finally resume blinking rapidly. If you do not see this, check your Clutch Pedal Position</p><p>Switch signal connection (WOT Box GREEN wire).</p><p>3. Next, start the engine. Quickly press the gas pedal to the floor and immediately step on the</p><p>clutch. You should hear the engine start to rev up, stumble for a short period while the</p><p>ignition is cut, then return back on and continue revving. Remove your foot from the gas</p><p>before you hit the rev limiter. The 2‐step will not engage if the gas is depressed before the</p><p>clutch. This is normal. If the engine does not stumble or pause when the LED turns out, then</p><p>check the RED/BLACK paired wire. Verify that the RED and BLACK 16 AWG wires are wired</p><p>facing the proper way. If they are reversed, the ignition cut will not work.</p><p>4. Lastly, test the 2‐Step. Press the clutch pedal down and then quickly press the gas pedal all</p><p>the way down. The gas pedal must be floored for the 2‐step to engage. The engine should</p><p>rev up to the desired RPM and hold. If it does not, be sure to remove your foot from the gas</p><p>before you hit the rev limiter. If the 2‐step does not work, check the WOT Box YELLOW</p><p>wire.</p></blockquote><p></p>
[QUOTE="nanastymach1, post: 12314822, member: 70023"] Today I worked on installing this on my turbo 03 cobra and let's start off that I have a chip installed and tuned by fast lane motorsports which already has a 2 step installed so i don't think the wotbox 2 step works But I really want the no lift shift part to work... the 1st 2 steps to test looks good and works fine but the #3 test doesn't work and we think we installed the red and black wires just the way the instructions said need help...ill take pics tomorrow Troubleshooting ‐ Testing the WOT Box 1. Key on the car but do not start the engine. Press the gas pedal to the floor. You should see the LED on the WOT Box start to rapidly blink. If it does not, check your APP sensor signal connection (WOT Box BLUE wire). 2. Next, with the gas pedal still depressed, press the clutch pedal to the floor. You should see the LED on the WOT Box briefly go out, and then come back on solid for one second and then finally resume blinking rapidly. If you do not see this, check your Clutch Pedal Position Switch signal connection (WOT Box GREEN wire). 3. Next, start the engine. Quickly press the gas pedal to the floor and immediately step on the clutch. You should hear the engine start to rev up, stumble for a short period while the ignition is cut, then return back on and continue revving. Remove your foot from the gas before you hit the rev limiter. The 2‐step will not engage if the gas is depressed before the clutch. This is normal. If the engine does not stumble or pause when the LED turns out, then check the RED/BLACK paired wire. Verify that the RED and BLACK 16 AWG wires are wired facing the proper way. If they are reversed, the ignition cut will not work. 4. Lastly, test the 2‐Step. Press the clutch pedal down and then quickly press the gas pedal all the way down. The gas pedal must be floored for the 2‐step to engage. The engine should rev up to the desired RPM and hold. If it does not, be sure to remove your foot from the gas before you hit the rev limiter. If the 2‐step does not work, check the WOT Box YELLOW wire. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Cobra Forums
The Terminator
Turbo Cobras
wot box install help
Top