Tonight I tucked the interceptor away in the kick panel and made a little headway in starting on the harness install so I can take advantage of the boost tables. Pic one shows my new GM harness which fits my map sensor perfectly. Pic 2 shows the harness on the interceptor I need to connect the three wires coming off the map sensor harness to. The wires on the harness are labeled A, B, and C. I know A is the ground, B is the sensor signal, and C is the +5v sensor power. However, I don't know which one to plug to which connector on the interceptor harness. On the interceptor harness the wires are: pink w/ brown stripe, pink w/ purple stripe, and pink w/ yellow stripe. Does anyone have any idea which should go to which? The last pic shows how I tucked away the interceptor.
