Will This Offset Work for The Front?

[Dixarect]

Hey guys i'm about to purchase some new 18s all the way around. My question pertains to the front.

The wheels i'm looking at are 18x9.5 with a 38 offset being the lowest they offer.

The calculator I used says this will put the wheel 18mm closer to the strut tower. (roughly 3/4 inch) than my current setup (17x9 +26) will this cause horrible rubbing issues? Will I be okay with this? Anyone had a similar offset/wheel combo?

I'm trying to gather information before I make the purchase.

Thanks SVTP:rockon:

 

[50enzo]

you should be fine.i run a 19x9.5 in the front with a 35/6mm offset i believe, and a 20x10.5 in the rear with same offset.
fronts turn lock to lock no problems. and im lowered on H&Rs

 

[Dixarect]

you should be fine.i run a 19x9.5 in the front with a 35/6mm offset i believe, and a 20x10.5 in the rear with same offset.
fronts turn lock to lock no problems. and im lowered on H&Rs

What wheels?