Will these wheels fit?

[out99sider]

I posted this in my SN95 section but figured the more eyes and feedback the better....

Will these offsets work? Longtime member needs your help- have to make a decision
I rarely post on here anymore- looking for your help. I found some high-end dream wheels that I have always wanted and the deal seems to be a potential STEAL

The specs are:
19x9.5" with 49 offset and 275/30/19 tires
19x10.5" with a 50 offset and 285/39/19 tires

First question- would these specs work? The tires on them are the exact size I would need already in place.

The hub bore is 70.4- I read somewhere we are a 70.3 so I'm assuming this is so close it is a misprint somewhere and a direct fit

Lastly- these are 5x120. I have researched people redrilling to 114.3. Is this feasible?

I appreciate all advice in advance! Thanks

 

[Bigggy]

Redrilling will depend on the wheel itself. 49 and 50mm of offset is way too much, they will be inboard. As an example, to be flush out back I have the equivalent (with spacer) of 10.5 ET2 (wheel is ET22 + 20mm spacer).

You could run a spacer adapter to fit the wheel with the original bolt pattern, but 40-45mm is a lot of spacer IMO.