Will these wheels fit 18*11 / 18*9.5

[FaYgOkRiS]

For a 2013 GT

18 x 11
Bolt Pattern 5-100/5-114.3
Offset +20
Backspacing 6.79
Lip Depth 3.5"
Centerbore 73.1

18 x 9.5

Bolt Pattern 5-100/5-114.3
Offset +35
Backspacing 6.63
Lip Depth 2.75"
Centerbore 73.1


XXR Wheels: 531 18x11 Flat Black Rims

XXR Wheels: 531 18x9.5 Flat Black Rims

Its between these and SVE Drifts, but I would rather have a 18 *11 wheel
the fronts also have an 18 * 8.5 available

 

[FaYgOkRiS]

I found this website and shows that these fit:

Wheel Offset 2013 Ford Mustang Flush Dropped 1 3" Custom Rims

Forgestar CF10

Front: 19x9.5
Offset: 26
Backspacing: 6.27362
Stance: Flush

Rear: 19x11
Offset: 21
Backspacing: 6.82677
Stance: Flush

Michelin Super Sports

265/35
26.3"x10.4" 305/30
26.2"x12"

 

[kaane]

Umm.. no way will 20mm offset fit on a 18x11. You need like 53mm offset in the rear.

So those wheels won't fit.

 

[FaYgOkRiS]

Why did it work for a 19*11? Thanks for the reply, I have been searching like a mofo

 

[kaane]

That is not the correct offset for those wheels. Someone posted wrong info.

 

[FaYgOkRiS]

So what would I be looking for in a 18*11?

 

[chao5.0]

for an 11" rear wheel you need something in the +53 to +55 offset, look through the wheel thread and some guys have posted what offsets they use for a 11" wide wheel.

 

[FaYgOkRiS]

Help me out here, if I took a pair of 9.5" wheels with a +35 offset and had them widened to an 11 " wheel, this would effectively change the offset to something like + 73 correct?

Wouldn't adding a wheel spacer to this setup, say a 15 mm spacer, effectively than change it back to a + 58 offset?

Or is my understanding of this way off.

 

[byeofcr]

Offset stuff hurts my head.. I still dont get it

 

[Tuffnuts23]

I don't know how much lug you would have left with a 15mm spacer. I highly doubt you'd get 6 turns on a lug nut

 

[Thalilbear02]

The offsets are 100% wrong, no way that's fitting. Mine are 20x10 ET40 fronts and 20x11 ET55 rears, and that's with the rears outside the fenders by about 3mm's, ET58 on a 11" wide is basically spot on flush.

 

[FaYgOkRiS]

Yeah, I have since moved onto finding a pair of 19's that I like enough to send to weldcraft, but I know there is some amount of math going to be needed. For some reason when I was looking at those wheels, I was thinking due to the 3.5" wheel lip, it would fit. Too much math, my head hurts