Will these parts from a foxbody fit/work on a 98 cobra

[GRUSE]

Saw this on Craigs list off an 89 fox wonder if they will fit and are worth getting?
Eibach Sportline Springs (includes urethane isolators):
Eibach Front and Rear Swaybars (includes Urethane bushings and end links):
Koni Yellow Single Adjustable Struts and Shocks (Front and Rear):
Granatelli Motorsports Adjustable Rear Lower Control Arms
Thanks for any info.

 

[Mystic-SVT]

From what I know for a fact will work are the following:

-springs
-rear lower control arms
-shocks
-rear swap bar

The front struts I'm not 100% sure on, you will need to measure the area on the strut where it mounts to the spindle, make sure they are the same width between the fox spindle and sn95 spindle. There is also a difference in rod length between sn95 struts and fox struts but I have seen guys use fox struts on their lowered sn95s.

As for the front sway bar I don't really know if it swaps over.

 

[Tickle]

I think the struts will fit. A lot of people actually order fox struts for lowered sn95s. I read this all over the place when I was researching shocks/struts.

 

[GRUSE]

I think the struts will fit. A lot of people actually order fox struts for lowered sn95s. I read this all over the place when I was researching shocks/struts.

Thanks I saw some of those posts as well about struts, wanted to verify the info here where guy are experts in sn95's.
What about rear shocks are they compatible as well.
Thanks
G.

 

[Jon96cobra]

My dad has an 89 LX and we have the Lower control arms off an SN95 on it so I believe the front suspension pieces will cross over. I would just check mounting locations for the front
sway bar.

 

[Apicia]

I went to order some Fox struts and shocks for my 96 Cobra. There were two rears shock part numbers... one for a GT and the other an LX. Which should us SN95 guys use?

 

[2DXTRM]

I went to order some Fox struts and shocks for my 96 Cobra. There were two rears shock part numbers... one for a GT and the other an LX. Which should us SN95 guys use?

Use the SN95 Shocks for the rear.

Use SN95 struts for the front if youre using Caster/Camber plates.