As some of you know I just picked up an 03 SB Cobra and sold my Mach 1. I have a brand new set of Comp 106400 cams that I was planning to put in the Mach. Here are the specs
Cam Style Hydraulic roller follower
Basic Operating RPM Range 1,800-6,200
Intake Duration at 050 inch Lift 234
Exhaust Duration at 050 inch Lift 232
Duration at 050 inch Lift 234 int./232 exh.
Advertised Intake Duration 269
Advertised Exhaust Duration 267
Advertised Duration 269 int./267 exh.
Intake Valve Lift with Factory Rocker Arm Ratio 0.475 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio 0.450 in.
Valve Lift with Factory Rocker Arm Ratio 0.475 int./0.450 exh.
Lobe Separation (degrees) 114
Computer-Controlled Compatible Yes
Grind Number XE270BH-114
Valve Springs Required Yes
Quantity Sold as a set of 4.
Notes Fits 4V DOHC engines only, requires lower gears, exhaust upgrades, larger fuel injectors, throttle body, MAF sensor, and computer modifications.
Cam Style Hydraulic roller follower
Basic Operating RPM Range 1,800-6,200
Intake Duration at 050 inch Lift 234
Exhaust Duration at 050 inch Lift 232
Duration at 050 inch Lift 234 int./232 exh.
Advertised Intake Duration 269
Advertised Exhaust Duration 267
Advertised Duration 269 int./267 exh.
Intake Valve Lift with Factory Rocker Arm Ratio 0.475 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio 0.450 in.
Valve Lift with Factory Rocker Arm Ratio 0.475 int./0.450 exh.
Lobe Separation (degrees) 114
Computer-Controlled Compatible Yes
Grind Number XE270BH-114
Valve Springs Required Yes
Quantity Sold as a set of 4.
Notes Fits 4V DOHC engines only, requires lower gears, exhaust upgrades, larger fuel injectors, throttle body, MAF sensor, and computer modifications.
