Will 315 fit with h&r race springs

[tegan]

I have been researching this for days and I cannot find the answer. I know the tire size subject has been beaten to death. I just got an 03 vert. it is pretty much stock. I just order h&r race springs, mm cc plates and low profile IRS bolts. I found some 18x10.5 wheels that I really like that have 22 offset. The afs 18x10.5 are a 27 offset so my wheels will come out to the well a little bit more. I wanted to know if 315/30/18 will fit. I see a lot of people talking about hitting the IRS bolts and the either get the low profile bolts or put on a spacer but they don't talk about clearance on the other side. What I want to know is will I need to roll my fenders with 315 with h&r race springs with stock iso in on 10.5 wheels?

 

[SuperTorched]

They will fit. I would get a 3/8 spacer added to what you have and you are set!!

Edit: My fenders are rolled. I skipped that part on your post. Without your fenders rolled it will depend on what brand tire you choose. For insurance I would get your fenders rolled. Then you won't ever have to worry imo

 

[f2hatch]

I ran that size tire and wheel with no problems no spacer and unrolled 1/4's. Only mod I did was the low profile IRS bolt. That was with 315/30/18 BFG drag radial.

 

[cobracrazee]

i got the 315/30/18 with 18x10.5 Saleen replicas they fit great with the IRS bolts with my H&R springs. Without the bolts the inside tire hits the bolt. The spacer you don't really need, but looks a lot better when you put them on, brings the tire out just a little so looks flusher to the fender lip. You can purchase everything from Lethal, probably $60 for everything. If you go with bigger spacer, make sure to have enough thread for your tire bolt, to be safe. Hope that helps

 

[nol300]

 

[Comp281]

I have the BFG 315's with AFS 18x10.5's. Low profile bolt & 3/8" hubcentric spacer to make sure there is no rubbing. And the H&R race springs of course.

 

[Benjaio]

335s with h&r sports stock irs bolt fenders not rolled

Sent from my SCH-I535 using Tapatalk 2

 

[vetteeatinsnake]

I run 315x35/17 nitto nt05's. I also had the same size MT et street radials. I did a quarter inch spacer and mine fit perfectly with no rubbing.

 

[evers86]

I have the bfg 335's with h and r springs and isos. no spacers, irs bolt or fenders rolled