Will 2013 clutch fit my 2010?

[03bananacobra]

I hve a 2010 i just bought naturally needs a tranny rebuild. Was wondering if any one knows or has heard of a 2013 GT500 clutch and flywheel will fit in my 2010. Any insight is greatly appreciated

Posted via Topify using iPhone/iPad

 

[Red-GT500]

Not totally sure but as long as you use the whole setup (clutch flywheel slave cylinder) it should work. I know the output shaft has a different spline count but I think the input is still the same.

 

[19COBRA93]

Yes it's a direct fit. The flywheel is the same for all '10-14 GT500's, as well as the TSB replacements for the 07-09's.

 

[03bananacobra]

Yes it's a direct fit. The flywheel is the same for all '10-14 GT500's, as well as the TSB replacements for the 07-09's.

So i can theoretically get a 13 flywheel and clutch thats used or bnib and bolt it right up? I know the part numbers are dofferent obviously the 13/14 clutch should handle more power compared to the 07-12 model yrs.

Posted via Topify using iPhone/iPad

 

[19COBRA93]

So i can theoretically get a 13 flywheel and clutch thats used or bnib and bolt it right up? I know the part numbers are dofferent obviously the 13/14 clutch should handle more power compared to the 07-12 model yrs.

Posted via Topify using iPhone/iPad

You can in reality get a '13/14 clutch and flywheel and bolt it right up. Nothing theory about it.

For what it's worth, I'm running a '12 clutch with no problems at 800rwh. But I wouldn't hesitate running run from a '13/14.

 

[NightRide]

If we're picking a year to go with I would choose an 11/12 clutch after the threads I've seen in the 13+ section having failures, imo.

 

[03bananacobra]

So i can theoretically get a 13 flywheel and clutch thats used or bnib and bolt it right up? I know the part numbers are dofferent obviously the 13/14 clutch should handle more power compared to the 07-12 model yrs.

Posted via Topify using iPhone/iPad

You can in reality get a '13/14 clutch and flywheel and bolt it right up. Nothing theory about it.

For what it's worth, I'm running a '12 clutch with no problems at 800rwh. But I wouldn't hesitate running run from a '13/14.

Ok awesome! Ive heard tranny shops say the twin disc sucks and all this so factory for me is cool long as they hold good power. Im not making 800 yet :-/ but hopefully in the bext yr with a built shortblock from MMR AND A KB 2.8 looks like ill go with a 12 then thanks guys!!

Posted via Topify using iPhone/iPad