where is the best location for the o2 sensor.
wide band location
- Thread starter whitesn95cobra
- Start date
As close to the collector as possible. And above the 9 and 3 positions.
are you running the factory up stream o2?
He should be. The car won't run too well without it
yep. short term fuel trim will drop to .75 after 3 mins if not..
still running the up stream.
I was just curious because the motor has two banks, and was wondering from a tuning stand point the difference between the two sides. The factory computer gets info from both so why would i not want to see what both sides are doing. is it possible to average the two or maybe run two sensors? i am aware the farther away from the head the longer for the information is to get to the sensor. i am new at tuning and was just throwing it out there!
I was just curious because the motor has two banks, and was wondering from a tuning stand point the difference between the two sides. The factory computer gets info from both so why would i not want to see what both sides are doing. is it possible to average the two or maybe run two sensors? i am aware the farther away from the head the longer for the information is to get to the sensor. i am new at tuning and was just throwing it out there!
You can run two sensors, but you'll need a gauge for each one. I think there's a company that makes a unit that you can use two sensors with, but I remember it not being very small. Most people just go off one bank. Unless the other side has a mechanical issue there shouldn't be much difference in reading between the banks.
Users who are viewing this thread
