whu is running a 12" or larger rim with the irs?

[mobius]

considering some ccw rims want to know what width i can get? i was thinking a 12 and a 335 tire on 18s. will they fit?

 

[moot09]

Get ready to roll your fenders.

Parts wise I'd say you'll need a Low Profile IRS bolt and at least 1/8th spacer.

Then again, I dont have 335s or a 12' wheel, thought I'd get the ball rolling for you though.

 

[Teej281]

With ccw's he would just have them backspaces and offset correctly to not need any spacers or whatever. I'd call ccw and see what they recommend.

 

[DICobra]

You'll be fine with 11" width rear with 335's

 

[04Mach1Blurr]

Would a 335/345 toyo proxies on a fr500 17x10.5 fit the IRS? (i know its a wide tire for that witdth, but its currently on the wheels im looking at getting, untill i wear it down ill get a better fitment, but was curious). I also have 1inch wheel spacers available that i can put on. And obvioulsy rolling the fenders. Oh and it has Eibach Pro-kit springs on the IRS,

 

[DICobra]

Would a 335/345 toyo proxies on a fr500 17x10.5 fit the IRS? (i know its a wide tire for that witdth, but its currently on the wheels im looking at getting, untill i wear it down ill get a better fitment, but was curious). I also have 1inch wheel spacers available that i can put on. And obvioulsy rolling the fenders. Oh and it has Eibach Pro-kit springs on the IRS,

I had 335's with 10.5" AFS wheels before my CCW's and it was fine, no issues. I had also a 3/8" spacer just to clear from the IRS bolt. I think 1" spacer is pushing too much out the fender.

 

[04Mach1Blurr]

Thanks, i appreciate the help. Ill look into a smaller spacer as well.

 

[wudy]

I had 335's with 10.5" AFS wheels before my CCW's and it was fine, no issues. I had also a 3/8" spacer just to clear from the IRS bolt. I think 1" spacer is pushing too much out the fender.

Do you have any pictures of this set up?