Who has swapped rear bumper cover to 13/14

[C.Stanley]

Did you only replace the bumper cover? Did you replace bumper cover mounts? Were you able to use your impact pad?

 

[Sonic 03 Cobra]

Ok so you can reuse the mounts, same part different part number. The impact absorber is different so you need that. You can reuse all of the clips along the top of the bumper but need new clips for the attachment points along the bottom. Hope this helps.

Here's the parts I bought, l didn't end up needing all of the clips and the mounts.

 

[C.Stanley]

Ok so you can reuse the mounts, same part different part number. The impact absorber is different so you need that. You can reuse all of the clips along the top of the bumper but need new clips for the attachment points along the bottom. Hope this helps.

Here's the parts I bought, l didn't end up needing all of the clips and the mounts.

Thank you

I have all the pieces but I noticed when putting it together old impact absorber wouldn't let the bumper cover slide all the way on. I have a new one from a 14' gt but it didn't look like there was enough difference between the 2 to matter.

 

[Sonic 03 Cobra]

14 gt and gy500 would be the same