whipple/cammed 03

MUSTANGDB

New Member
Established Member
Joined
Mar 13, 2004
Messages
130
Location
NEW JERSEY
hey guys I have a question for you cobra pros? I currently am running a 3.0 upper and no lower. I want to keep the 3.0 upper and put on a 6# lower on. Any one out there with this setup? I am looking to up my torgue a bit as of right now I am sitting at 660 rwhp/570 rwtq.
 

postban

...rollin on 20's
Established Member
Joined
Jun 7, 2002
Messages
6,767
Location
SE Mich
Lower pulleies and twinswcrews were made for easch other. I "found" 3 psi I was missing witha 3.0/4lb combo. Was only making 18psi. Switched to 3.5/8lb and made 21psi. I suggest 3.5 and 6lb for best results. Use the biggest upper you can basically.
 

ptrfree

The problem cobra
Established Member
Joined
Apr 8, 2005
Messages
260
Location
SA Tx
I have a KB and am running a 6lb lower and a 3.1 upper. I have not run it up in the rpm to much yet but at 5500 I see 21lb's. Its brutal!! Nothing like breaking the tire loose at 85mph!
Lee
 

Users who are viewing this thread



Top