Whipple belt size - 3.00 pulley

[gx00850]

I searched but not find anything.

I need a belt size for 2.3L whipple with a 3.00 upper pulley, stock lower pulley, and the 4 piece BF idler set.

Thanks!

 

[younggun04]

I searched but not find anything.

I need a belt size for 2.3L whipple with a 3.00 upper pulley, stock lower pulley, and the 4 piece BF idler set.

Thanks!

Gatorback # 4080760

Make sure you have a notched tensioner it's VERY tight. I had to put the belt on the pulley and slide it underneath the top idler.

 

[RustyNutz]

I have the same setup...3inch upper pulley, billetflow idlers, stock lower. I have the Gates belt, model #K080760, You'll have to notch the tensioner. I had to use the same method as mentioned above to get the belt on...

 

[gx00850]

Thanks guys. Much appreciated - that was perfect!