whipple 2.3 ax140

[heywaitfourme]

Has roughly 3300 miles, never sprayed, never had anything but the stock pulley on it, and it's for the STOCK throttle body. It comes with everything, even the stickers I got with it! Looks like new, except the darn whipple stickers fell off of the sides. I have them, and they will be in the envelope with the instructions and all stickers I recieved with the whipple.

It layed down 575rwhp thru stock manifolds and stock midpipe, and 603 with l/ts and O/R H pipe running 19 psi, reading 17psi thru the L/T's. Best of 10.43 at the track with consistent 10.6-10.9's depending on how well I could drive when the lights went green.

Firm at $2,500. I will not take trades, I will not go lower. I will drive up to 100 miles to meet with someone for an extra 20 bucks.

Box measures 29 1/4 x 20 1/2 x 13 (inches) and comes in at 58 pounds. My zip code is 15946, (Johnstown, Pa) YOU can figure out shipping.

 

[heywaitfourme]

No one wants a super clean whipple? WOW!! Usually these things sell like hot cakes.

 

[03 TWIN]

Don't know much about the whipple's, but don't you have to change the pulley to get 17-19lbs of boost? How do you know the difference between an older whipple and the ax140? Please feel me in.

I'm very interested, just won't have any play money until the end of Feb.

 

[firemanmike]

Will this work with an aftermarket single bore throttle body? (Billetflows)

 

[03CobraDom]

Damn thats a great price...wishing i didn't send in $3800 towards my principle on my loan yesterday...decided its time to stop modding and pay the car off...

 

[QWKRN U]

Don't know much about the whipple's, but don't you have to change the pulley to get 17-19lbs of boost? How do you know the difference between an older whipple and the ax140? Please feel me in.

I'm very interested, just won't have any play money until the end of Feb.

Not mine but in the interest of hellping the guy out....
If it has the sight glass in the front its a newer 140AX unit. also if you look at the serial number on the top it should have a 3A in it. The pulley he has on it should net a reading of 15lbs. For the 17-19lbs he stated he was mostl likely running a 4lb lower.

Bump for a good deal on a what appears to be a nice unit.:beer:

 

[QWKRN U]

Will this work with an aftermarket single bore throttle body? (Billetflows)

Only if you change the inlet.

 

[N/Angel]

wow, wish I had the cash... bump for a good deal!!!

 

[sikcobra03]

pm sent

 

[BlueSS]

How far away are you from 01036?

 

[03 TWIN]

Not mine but in the interest of hellping the guy out....
If it has the sight glass in the front its a newer 140AX unit. also if you look at the serial number on the top it should have a 3A in it. The pulley he has on it should net a reading of 15lbs. For the 17-19lbs he stated he was mostl likely running a 4lb lower.
Bump for a good deal on a what appears to be a nice unit.:beer:

thanks

 

[heywaitfourme]

I was running stock pulley on whipple with a 6# lower.

I'm a fair person, so it goes first come first serve.

Cobrasoze is first
sikcobra03 is second
kissmysvt is third.....with 429 miles 7 1/2 hours....going by yahoo and your zip code only.

all pms replied

 

[EVILNSS]

Not to hijack your thread, but anyone who isnt able to get to purchase this blower I have a polished whipple FS.

 

[jeffs]

tt

 

[heywaitfourme]

Pending sale...will update tomorrow night.

 

[jeffs]

tt

 

[heywaitfourme]

First buyer backed out. Currently pending with a soldier overseas.

Then it goes to next who wants it.

 

[heywaitfourme]

Top

 

[noavgcobra]

still available? send me a pm i live in chicago and have cash ready

 

[.n0b.]

you still have this? pm me if you do