Which hole for BMR upper mount?

[Dave Schotz]

Hey guys... which hole should I be using with the BMR Upper mount for the UCA?

My car is lowered with Eibach pro kit

Thanks,
Dave

 

[mixxer]

Lower Hole

 

[Dave Schotz]

What if we did the 'standard' location hole? (which seems to be the upper hole?)
Thanks,
Dave

 

[Shelby-Stang]

Great question. This is one of the two things remaining on my suspension parts list. Im going to be going with the FRPP springs that lower ~1". Where did you purchase it from if you don't mind my asking?

 

[Dave Schotz]

Thanks to Kent & The Guys at Evolution... I took off the upper mount (only about 15 minutes off and on the 2nd time around)

Put the UCA in the lower hole... and got it all back together.

1 More question... everyone says 'use -1 or -2 down' for pinion angle... yet with the Aluminum driveshaft it says it must be '+ 2.7' to eliminate vibration???

Shelby-Stang... I bought direct from BMR as I purchased the UCA from someone else.

Thanks,
Dave