Where can I find this?

[Badlilstang]

Trying to build a setup to get my are breathers more straight up.. If I could find a fitting like this that would connect to the ports on the Valve covers it should work perfectly. I'm just not sure exactly what needs to be purchased and where I can purchase it.

https://ae01.alicdn.com/kf/HTB1ElsQ...35-45-degree-fuel-font-b-connector-b-font.jpg

 

[califsp]

https://www.summitracing.com/parts/...se1-_-dorman&gclid=CJT5z8XK_c4CFdgLgQodYCADIg

 

[Badlilstang]

https://www.summitracing.com/parts/...se1-_-dorman&gclid=CJT5z8XK_c4CFdgLgQodYCADIg

Close but wrong size.. needs to be 5/8 and a Ford clip for PCV.. Basically I need this below but in a 45 degree.. I know it's made I just have to find it..

http://www.uprproducts.com/ford-hardware-oem-pvc-snap-fitting-58-90-angle.html

 

[Badlilstang]

So I found a picture of exactly what I need but I believe it's the driver side PCV hose on a 2010-2014 GT500... Just have to find a dang part number.

http://i229.photobucket.com/albums/...atch_cans/2015-03-16_BTcans08_zps3galydrv.jpg

 

[Badlilstang]

Found it.. part of the hose on the driver side PCV of a GT500... AR3Z-6758-A contains the 45 degree fitting...

Wanted to try and point the valve cover breathers straight up like the JDM kit but didn't want to pay 160$..... made this for 75$ and can probably be done for less..