Wheel spacers????

[DOWN2EARTH411]

Does anyone know how big of wheel spacers can I put on my 2004 cobra with out having to replace the studs.

 

[T-Pain808]

I'm sure you can try bigger, but I personally wouldn't go more then 1/2 inch, but even thats steep. Check your lugs often or your going be 3 wheeling.

 

[TrickStang37]

the general concensus is 1/4 is OK, 3/8 is pushing it.

if you needed bigger, say 1" you can run hubcentric spacers, which would be fine too.

 

[Mr. Couper]

If you need a bigger spacer just change your studs out- it is an easy job

 

[speedwerx1000]

My 3/8" spacers came with new studs...

 

[Black Talon]

I would only go 1/4'' but you could go 3/8''.

 

[BIGV]

I have LFP's 3/8 spacers and ET lugs for over 2 years no problems 3/8 is the largest i would go.

 

[HISSMAN]

3/8ths here, and I changed the studs to ARP. Changing studs is very easy, and I know 100% that I am not going to pull a lugnut out on a hard corner.

 

[03redrocket]

I have the 3/8 hubcentric spacers and lugs from lethal!!! awesome!!!

 

[DOWN2EARTH411]

thank you guys very much!!! so I can go 3/8 without needing longer studs...thats what I'll do

 

[RussZTT]

PM echo412, I has a set that isn't using brand new.