wheel question

[roush1]

I am puttin new edge rims on my fox. I already have the 5 lug conv on my car but i am having clearance problems on the frount. what kind of rotor do i need to make these rims fit. They are 17/9 10th anniversary cobras.They wont fit tight up againt the rotor. They are hittin were the dust cap is. Please help.

 

[RUN4CVR]

I take it you used the lincoln rotors with packable bearings? if so the center bore of the new edge wheels is smaller than the older fox wheels the new edge is a sealed bearing
I used 95 Mustang spindles and sealed bearings with 2003 Gt 17x8 wheels

 

[wheelhopper]

I did the same with the front, but I put an IRS in the rear and used the '01 Cobra rims with 255/40/17s.

 

[Terminator-Fox]

Yeah you'll need to use 94+ spindles and rotors for those wheels to fit nice. 94-95 spindles will keep the stock fox front track width while 96-later will have a little wider width pushing the wheels out farther.

 

[roush1]

Thanks alot thats what i need to know. You all was a bunch of help.

 

[epastang]

im looking for some svt rims or some mach 1 rims with 275 or 285