What's your dyno # estimate for my car ?

[Maxspeed04svt]

So my current mods and numbers are in the sig . That was hitting a max of 15#s of boost.

Upgrading to a gen 2 Tvs with a 3" pulley, (stock lower ) should be around 17#s of boost

And also installing a fore return style fuel system .

What's your estimate? Anyone with a similar setup please chime in .


Will be on 93 octane

 

[Bdubbs]

Running 91-93 octane? If so I've seen anything from 575-630 posted on here LOL. It's all in the dyno. With a 3" upper I was hitting 18 psi. And I haven't even put mine on the dyno yet with new tuner, 19 psi, and e85.

 

[cj428mach]

600rwhp.

 

[Maxspeed04svt]

I forgot to mention that , I'll be on 93

 

[13COBRA]

731/746

 

[Maxspeed04svt]

Lmao if it hits 700 I've got a problem

 

[13COBRA]

Lmao if it hits 700 I've got a problem

I was kidding.

Real guess: 585-595. 600+ on a happy dyno.

 

[Blueline]

mustang dyno: 570-585

dynojet: 590-605

 

[Bdubbs]

I was kidding.

Real guess: 585-595. 600+ on a happy dyno.

Exactly, I was on a dyno jet and sae #'s were 576/528 with stock manifolds. I currently have a video of mine doing a 40-140 pull for others to see. Then they can make judgments as to what it makes .

 

[Maxspeed04svt]

My tuners dyno seems happy considering my current ported blower numbers , 600 would be nice still either way

Lets see the video dubs

 

[Riddick]

Should be around 600. I'm running the same set up as you and mine put down 627 on 17 psi on 93 octane. Several other TVS cars have been on the same dyno and similiar set up usually put down high 500s low 600s. If TRBO VNM sees this thread he can give you a better estimate, hes probably had 20-30 TVS cars on that same dyno. I always teel everyone done get caught up in the numbers game, take it to the track and that will tell you what shes making. From my experience a 600 RWHP full weight Cobra should be able to trap 130 with an average driver behind the wheel.

 

[2010 Red&white]

601.5 rwhp

 

[braindontstop31]

My setup is about same as yours, 3" upper, stock lower, mine made on 563 on Mustang Dyno(I got 3:73 gears). my guess 565-585whp about 540-550tq

 

[NiceCobra]

I have the same setup going on and will hopefully be hitting the dyno in a week or 2