what will it run in the 1/4??

Black94svt

New Member
Joined
May 26, 2004
Messages
332
Location
South Florida
1992 foxbody coupe mustang: 408 stroker blue printed and balanced. Main stud girdle, afr 205 heads, custom anderson solid roller cam .620 lift on intake .620 lift on exhaust. victor jr single plane intake with a pro systems custom carb for engine 850 cfm. 1.6 rockers with girdle. Motor should make around 550 and revs out around 7000 rpm. The compression on the motor is 11:1, Exhaust is bbk 1 3/4 longtubes o/r bbk x pipe with single chamber flows dumped. It has no a/c no power steering. Just alternator and water pump.The fuel system is a 12 gallon fuel cell with aeromotive a1000 pump and aeromotive regulator with a return. It has a tko600 trans with a dual friction centerforce clutch and aluminum driveshaft. 3.73 gears and some bolt on suspension in rear with subframe connectors. The car has a tubular k member with coil overs. Ther car went on a major diet with no back seats no wires under dash everything ripped out that wasnt needed. The old gas tank and all the lines were gutted and the car is running on 104 race gas and mickey et streets.
 

kirks5oh

kirks5oh
Established Member
Joined
Nov 23, 2004
Messages
7,444
Location
wi
too many variables to tell for sure. but if its not at least low 10's then something's wrong. don't expect to run the car's potential the first time to the track either--it takes practice to get used to the car itself, and get any bugs worked out.
 

JSZ03

Local Mustang Legend
Established Member
Joined
Oct 29, 2006
Messages
1,571
Location
PA
if its got the driver mod and some traction, low 10s easy
 

Users who are viewing this thread



Top