What plugs/gap and boost are you guys running??

[rfiresnake]

I have tr6's gapped around .028 @ 22.5lbs of boost

 

[04ASSASSIN]

Tr6 gaped at .028 @22psi and a 100 shot

 

[stkjock]

TR6s @ .028 @ 20psi

 

[Black*Death]

TR6's @ .032 at about 11 pounds

 

[VenomSVT03]

BR7EF's 27 psi gapped at .024

 

[92hatchlx]

FRPP M-12405-M50 plugs, .032 gap only 6.3 lbs up here in Colorado.

 

[SinisterX]

subscribed, Autolite 103's @ .25 at 14 psi, but I think they are two cold for cruising.

 

[stkjock]

subscribed, Autolite 103's @ .25 at 14 psi, but I think they are two cold for cruising.

I hoped mean .025? However that is too small IMO for 14#, .030-.032 makes more sense.

 

[SinisterX]

I hoped mean .025? However that is too small IMO for 14#, .030-.032 makes more sense.

Yes .025 , I'm upping boost to 20+

 

[turbov6joe]

Safe to say that TR6's gapped at .030 for a 16 psi E85 2003 Cobra motor is correct?

 

[stkjock]

Safe to say that TR6's gapped at .030 for a 16 psi E85 2003 Cobra motor is correct?

Should be fine

 

[YuGneLrn2Day]

TR's gapped at .028 running 17lbs of boost

 

[sprsonic]

tr6's gapped .028 22 psi boost

 

[SinisterX]

just tried Autolite AR93's , it's a non resistor. They worked great up to 18 psi so far 800 hp range.

Just be sure to not use a flip chip, it will cause interference.

 

[Z06KILLR]

Tr7 @ .18-.19

 

[stkjock]

Tr7 @ .18-.19

I hpoe u mean .018-.019

How much boost r u running! That seems extraordinarily narrow.

 

[iggster]

I ran tr6 up to around 21lbs gapped at .030 I run tr7s at .030 28lbs.

 

[oem]

I currently have a tr6 in, not sure if the gap is right though. Im seeing 13-14psi out of an Eaton, and have a 75 shot... any reccomendations?

 

[stkjock]

.032

 

[Mystic03]

[email protected]