What is wrong with my clutch/tranny !!

[96svtsnake]

I had a problem with my clutch pedal vibrating when driving and couldn't adjust it out. Replaced the cable with a stock ford one, mm firewall adjuster and quadrant. No matter how I adjust it the pedal still vibrates and makes noise. What else could it be ? Any help would be great, Im sick of messing with this thing already.

 

[Toasty]

Throw out bearing
pilot bearing
warped flywheel
bad bearings on your input shaft of your trans

All the above will require removal of the transmission for inspection and repair.

 

[STAMPEDE3]

Tob

 

[006]

Yep, your TOB is not straight. It has a wobble.

I recommend a Timken TOB as a replacement part # 614014

 

[96svtsnake]

I just had a new clutch put in about 1000 miles ago and it came with a new throw out bearing. Could it be bad already ? It's the fidaza 2.1 clutch kit. I was thinking warped flywheel, but it was just resurfaced during the install.

 

[Helomech74]

Check the adjustment of the clutch. Get under the car, and check to see how the TOB is riding on the pressure plate fingers.