All you guys still running the stock clutch and rear end?
What is the fastest stock motor 6 spd record?
- Thread starter 90coupe5oh
- Start date
I am still on the stock cluch and rear but havent ran it at the track that much with the blower. Only ran it 3 times on drag radials when n/a and twice with the blower
I was on 93 octane, running a 28x 10.5-15 full slick. Was a fairly easy launch around 3500. Only got to run 3 times that night and track was not prepped very well. So I couldn't leave any harder off the line because it would just break loose.
I'm not sure if the 9 second mt82 record holder has a stock block but Lethal's old grabber blue 2011 went 10.20 at 135 years ago on a stock motor. OP, have you run it in the 1/4 mile or just 1/8?
What was its setup?
Whipple 2.9 I believe.
I've just been running 1/8th, I want to get all the suspension parts on and dialed in before I even bother with the 1/4. I don't know how many 1/4 mile passes it's gonna survive with how hard I'll be hitting it once I get everything dialed in. My car has prob made 40 passes on the stock clutch and rearend pulling consistent 1.45-1.55 60ft's, the clutch starts to chatter a little on the top end though on the gas.
OP... might be random but were you at burlington tonight?
Yep, that's me haha.
Cool I was in and out a couple of times. Saw your car and immediately recognized it
If you are running a slick out back with the stock radials up front, that is the reason for the handling issues. I had terrible issues with a 26 inch slick out back and stock radial up front. You need a bias ply front. Hell, I have a 26 inch DR on the back of my car right now and it tracks funny with the stock tires up front.
Mike
Mike
Does anyone know if I got this record with my 10.007@138. I've been searching and it seems there is only one other mt82 faster then mine but his is on built motor.
We have been 10.004@145 on the Stock Boss 302 motor, but it's with a Magnum XL 6 speed, not the MT82.
Very nice. But better heads and cams plus stronger internals. Mine is just standard gt motor.
Users who are viewing this thread
