What is the easiest way to run the hot/ground amp wires?

[04mellowyellow]

How did you run your hot wire from the battery to the amp? Also, is there a good bolt I can hook the ground up to behind the seats?

 

[voodoocustoms]

I pulled the battery and ran the power cable thru the firewall next to the ECU.

 

[Kryo-Genik]

mine is run along the frame rail and up thru the floor...there is a factory grommet i used thats right under the door sill

 

[04mellowyellow]

I pulled the battery and ran the power cable thru the firewall next to the ECU.

Not sure why you would need to pull the battery.

 

[04mellowyellow]

mine is run along the frame rail and up thru the floor...there is a factory grommet i used thats right under the door sill

I think I know extactly what grommet you are talking about and probably will go this route.

 

[chrisheltra]

mine is run along the frame rail and up thru the floor...there is a factory grommet i used thats right under the door sill

DING DING DING we have a winner.

 

[04mellowyellow]

Anyone have ideas on how to remove a rounded bolt. The postive battery cable bolt has been weathered down so bad from battery acid that it is almost round.

 

[chrisheltra]

vice grips