brhalv
New Member
Here is the general build:
351w sportsman block
Twisted wedge heads 203cc built by Ed Curtis (345cfm)
Custom turbo cam also ground by Ed CurtisEFI spider intake and elbow
Forged internals
Fuel and electronics:
AEM series 1 stand alone
Msd digital 6 box
Msd pro billet distributer
Msd blaster coil
Msd 8.8 plug wires
Aeromotive A1000 fuel pump with 10an and 8 an return lines
Deka 80 pound injectors
Turbo:
Turbonetics T76 duel ball bearing
Ceramic coated hot and cold sides
3 row front mount intercooler
Tial 44mm blow off valve
Tial 50mm waste gate with 9 pound spring
This set up at 9 pounds
I'm looking for at least 600 hp to the wheels. I have all the supporting mods and I'm not a rookie. It will be tuned by a professional after installation. This will be a street/strip car. It needs to be safe and reliable under boost at 9 psi but looking to go up to 20 psi with a manual controller.
I have looked into id1000's and id1300's but they are SUPER expensive!
What injectors are people running at this HP range under boost? My Deka 80's are running out of fuel around 480 RWHP.
I see Holly has some 120# and 160# injectors for half the price of id1000's. Anyone running these?
https://www.holley.com/products/fuel_systems/fuel_injection/injectors/parts/522-168
Any input will be highly appreciated.
351w sportsman block
Twisted wedge heads 203cc built by Ed Curtis (345cfm)
Custom turbo cam also ground by Ed CurtisEFI spider intake and elbow
Forged internals
Fuel and electronics:
AEM series 1 stand alone
Msd digital 6 box
Msd pro billet distributer
Msd blaster coil
Msd 8.8 plug wires
Aeromotive A1000 fuel pump with 10an and 8 an return lines
Deka 80 pound injectors
Turbo:
Turbonetics T76 duel ball bearing
Ceramic coated hot and cold sides
3 row front mount intercooler
Tial 44mm blow off valve
Tial 50mm waste gate with 9 pound spring
This set up at 9 pounds
I'm looking for at least 600 hp to the wheels. I have all the supporting mods and I'm not a rookie. It will be tuned by a professional after installation. This will be a street/strip car. It needs to be safe and reliable under boost at 9 psi but looking to go up to 20 psi with a manual controller.
I have looked into id1000's and id1300's but they are SUPER expensive!
What injectors are people running at this HP range under boost? My Deka 80's are running out of fuel around 480 RWHP.
I see Holly has some 120# and 160# injectors for half the price of id1000's. Anyone running these?
https://www.holley.com/products/fuel_systems/fuel_injection/injectors/parts/522-168
Any input will be highly appreciated.
Last edited: