What flywheel to run & intercool pump

[upnorthguy]

I have a 2011 and going to be replacing the clutch with a RTX should I buy a steel or Aluminum flywheel. This is a street car with 700 rwh and do some drag racing. Also looking at up grading the intercool pump what is everyone using. Thanks

 

[Robert M]

The 2013/14 I/C pump is a nice bolt-in for use on the 2007-2012 and especially the 2011-2012 since they have electric steering. The oem pump will bolt in the oem 2013/14 location on the 2011/12 and a plug and play harness can be made from the VMP 2007-2012 I/C pump extension harness with the correct oem 2013/14 harness pigtail added at the pump end.

If you want a oem look "like it came that way from the factory", you will also need the 2013/14 oem I/C reservoir to pump hose with the by-pass.



R

 

[Catmonkey]

With the RXT made for the 2011+, you use your stock flywheel. The whole clutch assembly bolts to the factory flywheel.

 

[centerforce]

We would recommend going with a stock or a lightened steel flywheel for any vehicle that sees the street more than track.