What are stock 99 cams set at?

[stang8762]

Just got done tearing apart my motor due to a cracked #7 piston and i am going to slap a set of forged pistons and rods in it , have it rebalanced and have the heads re-done. When we took the heads off we checked what the cams were set at :

122 intake lobe center
110 exhaust lobe center

what is stock ?

What do you recommend setting them at w/ 9.5.1 comp, stock heads and stock everything else w/ a turbo?

 

[stang8762]

what is optimal for a turbo car? My engine is 9.5.1 comp

 

[stang8762]

I talked to some people i will be setting them at 108/110

 

[RPM4DAZ]

If your numbers are correct. The cams are installed on a 116' lob/sep and 6' retarded. I would probably install them @ 114' lob/sep straight up. Hence 114in/114ex. This would still idle smooth and most likely help a bit on the torque without hurting any upper end horsepower. Then again 112' would be a bit sharper and crisper for the street driver...