Weld rts rims front and rear

[astanek1]

Just ordered 17 by 9 and 15 by 10 6.5 backspacing weld rts rims as I am looking to use for drags and love the look.

After doing some research looks like it could be an issue on the rear and going to order the stainless brake lines banjo bolt. Any other advice and is it a real pain in the rear literally ??

 

[astanek1]

Stock irs setup btw

 

[01yellercobra]

I'm pretty sure you'll need to grind the toe link mount to get the 15's to fit. Is it too late to switch the order to 16's?

 

[astanek1]

I'm pretty sure you'll need to grind the toe link mount to get the 15's to fit. Is it too late to switch the order to 16's?

Would love to but weld and many others don’t make anything in 16

 

[fivelitrecobra]

Im not 100% on this, but I thought I remember reading the RTS's possibly clear the toe link. Worst case you'll have 10 minutes of grinding and the banjo bolt replacement.

 

[CustomX]

Im not 100% on this, but I thought I remember reading the RTS's possibly clear the toe link. Worst case you'll have 10 minutes of grinding and the banjo bolt replacement.

They will not clear, you will have to grind.

 

[Shadow Grey 03]

Caliper face might need massaging too