Weld Alumastar 2.0 on street?

[motoman620]

Anybody running Weld Alumastar 2.0 wheels on the street? Looking at getting these wheels, car is not a DD just not sure how the front runners will fair on the street. Thanks

 

[Force Induced]

I plan on running the Weld RTS beadlock rears and Alumastar fronts, They are not recommended for the street but I've been told they are fine on the street just avoid any big pot holes.

 

[Eric@jpc]

Avoid Bumps, Holes and sharp turns and you will be fine

 

[motoman620]

Thanks for the replies, I always ran Draglites on my Fox body and never had any issues even on our terrible Michigan roads but Draglites seem a bit more stout compared to the Alumastars. I guess common sense and caution is key. Thanks

 

[Turbosixx]

I run them on the street. No issues.

 

[01bluesnake]

Avoid Bumps, Holes and sharp turns and you will be fine

This^. I DD mine, and with bias ply's which sucks even more for turning. Just use extra caution, increase braking distance and try to keep attention from needing to do quick maneuvers.

 

[beefcake]

you would be better served with a welt rts or a race star

one hit the wrong way and your 400-500 wheel is shot

 

[Turbosixx]

you would be better served with a welt rts or a race star

one hit the wrong way and your $620 wheel is shot

Fixed it for you.