Ways to put drag wheels w/o grinding

[Eng90]

Hey guys,

Is there a way to put 15×10 weld rts without relocating the swaybar and grinding the place lower bolt ?

 

[scotmach]

No

 

[Eng90]

If i changed the rear sway bar to the bmr sb042 which is the adjustable swaybar ... since it has different mounting position, would it make me install the 15x10s without other modification ?

 

[Aaron@JPCRacing]

The sway bar bracket off of the rear end is still going to run into the wheel

 

[scotmach]

It's not the sway bar that's in the way, it's the lower shock mount. It has to be cut off. Not really a big deal.

 

[Eng90]

ok so if i want to do the sway bar relocation and grind the lower shock mount.

I have a 2013 boss mustang with lca with their relo brackets and upper control arm with its mount (poly bmr) ,, im new to this and im not sure what else is required to be done.

Do i need to do some more grinding to the lca relo brackets ?

Will the oem boss sway bar mount with no problems?

And if i did the swaybar relocation, would it alter or change handling characteristic of the rear suspension ??

 

[Healthforhazard]

If you don't already have the wheels 15x8 will fit without grinding and you can still run a 275/60

 

[cjd223]

It took me all of 10 minutes to grind off the shock mounts. It is a non event. Harbor Freight is your friend.

 

[Kman11]

As said above, get 15x8's or do the grinding. It's very simple.

Why are you trying to avoid the grinding?

 

[Eng90]

As said above, get 15x8's or do the grinding. It's very simple.

Why are you trying to avoid the grinding?

im afraid that if i grind the lower shock mount that i may wanna use it back or if i go for the relocation brakcet then i may face problems on autocross or curcuit and i cant return the sway bar to its original position.

Now if i did it, would it do any change or alter in the effect of swaybar on the rear suspension ?