Vortech V2 Strim - 96-98 and 99-01 Cobras

[TxCobrA98]

SOLD!

I have up for sale my Vortech V-2 S-trim with Aftercooler kit

ASKING: $2500 obo

The kit will fit all 96-98 and 99-2001 Cobras (elbow for both year model intakes included). The kit is pullied for 10-12 lbs. It is ready to install how it sits. The kit was recently rebuilt by Vortech and converted from an SQ-trim to an S-trim. The kit has less than 400 miles on it since the rebuild. You will not find a nicer kit for sale.

Kit includes:
S-trim Headunit
Aftercooler and all required piping and reservoir
All brackets
Air and Fuel system (MAF, 42lb injectors and harnesses, SVT Focus fuel pump)
Oil feed lines
Stock pulley
New belts
Coolant crossover tube (will need a little modifying with bracket to fit 96-98; EASY!)

Everything is labeled for your convenience and includes Vortech instructions as well as a homemade set of instructions that are very detailed.

 

[ninty9cobra]

Could I get a number to reach you at?

 

[ejarden46]

Would you sell just the head unit and coolant cross over?

 

[98 Saleen Cobra]

great price man, but just to let you know that aftercooler isn't interchangeable between 96-98 and 99-01. You'll have to cut the top part off of the aftercooler and weld a either a 96-98 or 99-01 depending on whats it is for now.. I know this because I had to do it with mine.. Good luck with the sale!! Might want to mention what year that aftercooler was for though :beer:

 

[TxCobrA98]

hey thank you 98saleen..

The aftercooler is for a 99-01 then. I was unaware of that issue. Thanks for clarifying!

 

[TxCobrA98]

Would you sell just the head unit and coolant cross over?

I would rather sell the kit as a whole. Thanks for asking though.

 

[98 Saleen Cobra]

^^ No problem bud.. You can get it to work.. You just have to buy the top part of the aftercooler and the pipe from the cooler to the T/B and then have it welded on.. :beer: It does cost some more money to have that switch done though.

 

[97cobra98gt]

i know you were saying you werent willing to seperate with the kit but i am trying to piece to gether a kit of my own i was wondering if you had a parts list by chance or know where i might find one? and if you change your mind about parting out let me know

 

[TxCobrA98]

I do not have a parts list or know where you could get one, sorry about that.

And bumppppp

 

[lukasxpl]

if you willing to part out let me know

 

[corysmach1]

You have a PM!!

 

[TxCobrA98]

sold!