VMP tvs 2.3, e85 - what is required?

[SVTvsTheWorld]

Planning on going 2.3 tvs blower, would like to set up and tune for 93 with enough fuel system to support e85. Goal 600 on pump 93 to 700whp on e85. What fuel system components are needed? There is so much info on fuel hats, return, deadhead?, pump sizes, etc. I wont go beyond this so I only need enough to support this power level.

And I'll be upgrading clutch and input shaft soon. Any other required items I need to budget for?

 

[15PSI]

You will need ID1000s or equivalent and a BAP for E85. If you have a built bottom end and want to pulley down, you will need a return style fuel system with E85. A 79mm pulley will net you around 625-650 on good quality 93. Another 30-40 with E85.

 

[SVTvsTheWorld]

You will need ID1000s or equivalent and a BAP for E85. If you have a built bottom end and want to pulley down, you will need a return style fuel system with E85. A 79mm pulley will net you around 625-650 on good quality 93. Another 30-40 with E85.

So boost a pump and id1000s will get the job done? No upgraded pumps or return style system necessary? Any downside to doing boost a pump and injector only? Is there a higher risk factor vs a full return system?