VMP Stage 2 Power Pack installed last night

NJredfire03

Active Member
Established Member
Joined
Feb 1, 2011
Messages
888
Location
New Jersey
Everything from VMP was delivered yesterday and I immediately installed it all at home. On top of the stage 2 I also got the Billet Pro Shop TB elbow. Install was straight forward and all done with 1/4in ratchet, extensions, swivel, 8mm deep well, 10mm deep well, small torx (forgot the size) for the MAF, and an allen (forgot the size). Took about two hours. I loaded the tune. Let it idle for about 10 minutes then I took it out. WOW!! Woke the car right up. Snappy throttle, throws ya back in the seat, and I can finally hear that TVS scream. If you don't want to mess with your car too much. This set up is perfect. Factory boost and plugs with a massive gain in power and smiles.

I did notice the fans coming on for long periods while driving, even in 60 degrees this morning. Wasn't expecting extra heat from this package. So I'm a little confused.

One more thing, with the elbow and TB, the dipstick hits the motor casing on the TB. Trying to find a place to zip tie it away from the TB. Even if it's off of it by a 1/4 inch. Better than it hitting.

Overall, pretty satisfied with this set up. Great bang for buck and an easy install to boot. 10/10 would recommend.

Here's some pictures of stock to aftermarket comparisons as well as the dipstick hitting. And a quick video of a 3rd gear pull last night. I let off a bit up top, got a little bumpy on the road. You'll hear some legitimate excitement at the end.

dd02867364f5cd66f1c58465cd73f5b7.jpg


272dbe997d494274780b7453fb01f4ce.jpg


844a0e5755dd8ab39963b3998ea103a4.jpg


a4d5fdd6eaf959e980a52f79f40f25c8.jpg


https://vimeo.com/179938321



Sent from my iPhone using Tapatalk
 

magrag

New Member
Established Member
Joined
Mar 22, 2008
Messages
26
Location
Ohio
A few questions about your stage 2.

Hello, I am new to these 2013 2014 Shelbys, but what you installed sounds like what I am looking for to up my 2014 a little.
My questions are:
What all do you get VMP stage 2?
What kind of power increase (estimate)?
Where can it be purchased?
Cost?
Does it include or need a tuner?
Thanks
 

NJredfire03

Active Member
Established Member
Joined
Feb 1, 2011
Messages
888
Location
New Jersey
Hello, I am new to these 2013 2014 Shelbys, but what you installed sounds like what I am looking for to up my 2014 a little.
My questions are:
What all do you get VMP stage 2?
What kind of power increase (estimate)?
Where can it be purchased?
Cost?
Does it include or need a tuner?
Thanks

www.vmpperformance.com is where I got it all. 1700 was the cost. Website tells you the rest.


Sent from my iPhone using Tapatalk
 

Users who are viewing this thread



Top