Upgraded 05-09 GT500 Fuel hat, 850hp, E85

Status
Not open for further replies.

JeremyH

Member
Established Member
Joined
Feb 19, 2014
Messages
243
Location
Norfolk VA
This upgraded GT500 dual fuel pump hat will support around
850rwhp depending on the setup, without a bap! It's a direct replacement for
your oem FRPP/GT500 dual fuel pump hat. This GT500 hat is modified by me with
two new AEM 50-1200 (ethanol compatible) 340lph fuel pumps and walbro prefilter
socks. I deleted all the factory lines and oem T fitting from the gt500 hat and
replaced them with larger 3/8" gates submersible lines and a higher flowing Y
fitting all held together by stainless fuel injection hose clamps. There is 10
gauge wire terminals running to each pump and the PPRV valve is deleted as well,
it has an 05-09 level sender on it. Fully assembled and ready to drop in.
This hat is ready to make big power! Want to make more?
These AEM pumps are designed to run up to 18volts and work great with a bap as
well if you need more later down the road. Most fuel you can get our of your
GT500 fuel system hands down and perfect for guys looking to swap over to
e85!

Info on the pumps.
http://www.foreinnovations.com/produ...em-50-1200.htm

*Requires the FRPP/GT500 fuel system dual fpdm harness, not
included.


$425 Free shipping!


20150213_212830_zpspjbtyls7.jpg

20150213_212807_zpswxf6lyih.jpg

20150213_212747_zpsxvcopynq.jpg

20150116_185217_zpsmof7aiwe.jpg

20150116_185212_zpsblurgpfq.jpg

20150116_185207_zpshay5xbqw.jpg
 
Last edited:

Stevan26

Member
Established Member
Joined
Nov 8, 2009
Messages
354
Location
MN
so will this directly plug and play replace my stock 2008 GT500 fuel hat assembley?

as in no custom wiring or fittings or connections? goes in the same way mine would come out?
 

JeremyH

Member
Established Member
Joined
Feb 19, 2014
Messages
243
Location
Norfolk VA
Yes they are manufacturer rated at a minimum of 320lph, but that is at gm 43.5psi/12v. At ford 39.15psi/13.5v they flow 340lph. Much like the deatschwerks dw300 pump, they rate it at 300lph, but it also flows 340lph on a ford efi system.
 
Last edited:

JeremyH

Member
Established Member
Joined
Feb 19, 2014
Messages
243
Location
Norfolk VA
Just this one I built right now so when its gone its gone. I do build them from time to time. I have probably built a dozen or so of these setups over the years.
 

JeremyH

Member
Established Member
Joined
Feb 19, 2014
Messages
243
Location
Norfolk VA
It would fit a 12 you would just have to swap the level sender, the reading resistance changed in 2010. The current level sender is for 07-09.
 
Status
Not open for further replies.

Users who are viewing this thread



Top