Home
What's new
Latest activity
Authors
Store
Latest reviews
Search products
Forums
New posts
Search forums
What's new
New posts
New listings
New products
New profile posts
Latest activity
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
Cart
Cart
Loading…
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Search titles only
By:
Menu
Log in
Register
Navigation
Install the app
Install
More options
Change style
Contact us
Close Menu
Forums
Cobra Forums
Cobra R's
UCA bushing help.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="toofast4u" data-source="post: 1170895" data-attributes="member: 3891"><p>It is cake. Remove the steel cap that has a 1 on. To remove the cap just put a screw driver between the bushing and the cap and twist and it should pop off. If it doesn't you can get to the lip of the cap inside the crush sleeve use a screw driver or chisel and hammer it off, I used an air hammer. Then take one of your 12mm bolts and put it in the bushing so that the head is where 2 is and take a large 1/2" short socket on the other side with the nut. Tighten the bolt and pull the bushing out. The steel shell stays, but the bushing and two caps go.</p><p><img src="http://www.modularfords.com/forums/attachment.php?attachmentid=6313&stc=1" alt="" class="fr-fic fr-dii fr-draggable " style="" /> </p><p></p><p>Here is what mine look like removed.</p><p><img src="http://www.modularfords.com/forums/attachment.php?attachmentid=6314&stc=1" alt="" class="fr-fic fr-dii fr-draggable " style="" /> </p><p></p><p>I think Bruce just has a destructive nature and wants to break stuff. ;-) :lol:</p></blockquote><p></p>
[QUOTE="toofast4u, post: 1170895, member: 3891"] It is cake. Remove the steel cap that has a 1 on. To remove the cap just put a screw driver between the bushing and the cap and twist and it should pop off. If it doesn't you can get to the lip of the cap inside the crush sleeve use a screw driver or chisel and hammer it off, I used an air hammer. Then take one of your 12mm bolts and put it in the bushing so that the head is where 2 is and take a large 1/2" short socket on the other side with the nut. Tighten the bolt and pull the bushing out. The steel shell stays, but the bushing and two caps go. [IMG]http://www.modularfords.com/forums/attachment.php?attachmentid=6313&stc=1[/IMG] Here is what mine look like removed. [IMG]http://www.modularfords.com/forums/attachment.php?attachmentid=6314&stc=1[/IMG] I think Bruce just has a destructive nature and wants to break stuff. ;-) :lol: [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Cobra Forums
Cobra R's
UCA bushing help.
Top