TT oiling questions.

[fastmach01]

I'm just curious how you all routed your oil feed and return lines for twin turbos. I have the Cg fab kit so my turbos mount high. What size feed/return as where are you pulling the oil and how are you getting it back to engine. Scavenger pump or what not. Thanks.

 

[xXAzureMach1Xx]

Only place to get the feed line from is by the oil cooler. Where the oil presure sensor is. As for feed line size IDK. Probably 4AN with oil restrictor if turbo needs it. I was told by Precision that 5/8 was the smallest drain line they recommend per turbo. No need for a pump if its a CG kit as the drain has a good fall to it with them mounted high. I just used a punched and tap on the pan. Screwed in a fitting to hook drain line to.

 

[itSSlow98]

-4an feed and -10 return. You literally cant go too big on the return line.