TSW Nurburgring Fitment issue

[5.0 Silverback]

Picked up a set of lightly used TSW's today with 275 and 285 tires on them.

I was having a hell of a time getting the stock lug nuts to fit; until I realized they probably were not meant to. (doh)

Can someone please point me to the proper size lug nut/item to order? Looks like I am going to need something much thinner than stock.

Also- I know there is an issue with the center cap fiting on the front wheel due to the dust cover I belive? Anyone have any advice around this issue as well.

Thanks!

 

[WhitePerGT]

You might need the 6 spline lug nuts, they are much narrower. I have to use these with my Niche Milan wheels as the stock lug nuts are too fat.

 

[califsp]

Sometimes they are called tuner lug nuts

 

[Thalilbear02]

Sometimes they are called tuner lug nuts

To add to that, most turner lugs are 17mm hex which will work on those wheels. Good luck OP, same issues happen with Forgestars, just need new nuts for new wheels on that one.

 

[burke985]

I have TSW and you need 3/4" lugs this is what I use.

http://m.americanmuscle.com/black-34-acorn-lug-nuts.html

 

[5.0 Silverback]

Got a basic set of "tuner" lugs from the local automotive store.

Thanks to everyone who chimed in. :beer:

 

[Thalilbear02]

Looks good! Need to lower that thing though for sure Congrats!

 

[burke985]

Got a basic set of "tuner" lugs from the local automotive store.

Thanks to everyone who chimed in. :beer:[/QUOTE]


Looks good but get you a set of the black lugs makes the wheels look so much better.