I did a Trilogy Marauder Port a while back and figured I should post the results. Blower is still a M112 so the exact same concepts go towards porting it.
This was the first Marauder port I've done but there's no need to make any changes on it. It performed very well with both me and the owner being happy with the results. The torque stayed down but it's just because of lower boost. With a lower on the car it would raise it up considerably. Also stock motors just don't like a ton of power because they can't handle as much.
Anyways.
Car was run with 12.5 lbs of boost and that was the same boost it ran pre-port.
Before numbers were=413.2 Max Torque- 435.7
After the port of the Blower, tb, plenum, and all the other parts for it here's the numbers.
Same boost like said above.
Race Port = 461.7 Max Torque: 446.1
:banana:
Like I said I'm very pleased with the results. Thanks to the owner for trusting me enough to do this.:thumbsup:
Thanks
This was the first Marauder port I've done but there's no need to make any changes on it. It performed very well with both me and the owner being happy with the results. The torque stayed down but it's just because of lower boost. With a lower on the car it would raise it up considerably. Also stock motors just don't like a ton of power because they can't handle as much.
Anyways.
Car was run with 12.5 lbs of boost and that was the same boost it ran pre-port.
Before numbers were=413.2 Max Torque- 435.7
After the port of the Blower, tb, plenum, and all the other parts for it here's the numbers.
Same boost like said above.
Race Port = 461.7 Max Torque: 446.1
:banana:
Like I said I'm very pleased with the results. Thanks to the owner for trusting me enough to do this.:thumbsup:
Thanks
